Quality FRP Flat Panel & Refrigerated Truck Panel factory

FRP fiberglass car panels - Reshape the building lighting environment and intelligent manufacturing eternal quality Core Value Proposition In the name of technology, we create a perfect conversation between light and space - as light as cloud wings and as strong as rocks. The light is transparent and unexposed and it will be renewed for a long time. Provide high-performance refrigeration solutions for modern industrial buildings, commercial spaces and green living. Six outstanding genes 1. Reduce body weight and improve load efficiency The density of fiberglass flat plates is only 1/4-1/5 of that of steel. Replacing traditional steel cabin plates can significantly reduce the body weight. When the vehicle load limit remains unchanged, the actual cargo carrying capacity can be increased while reducing fuel consumption (especially for long-distance freight vehicles, the economic advantages are obvious). 2. Resistant to corrosion and wear, extending the life of the car • For vehicles transporting corrosive goods (such as chemical raw materials, seawater products, pesticides, etc.), fiberglass flat plates have excellent acid and alkali resistance and salt spray resistance, which can avoid leakage of the carriage and structural damage caused by corrosion and rust of metal plates, greatly extend the service life of the carriage and reduce maintenance costs. • Its surface is smooth and hard. It is not prone to scratches or deformation when facing friction and collisions during loading and unloading of goods (such as building materials, ore, etc.), and is more durable than wood or ordinary plastic boards. 3. Sealing and protection, adapt to special transportation needs • Refrigerated/insulation car: The fiberglass flat plate has a low thermal conductivity and can be compounded with insulation materials (such as polyurethane foam layer) to form an efficient insulation structure, reduce heat exchange inside and outside the car, and can maintain a low temperature environment more stably with refrigeration equipment, and is suitable for cold chain transportation such as fresh food and medicine. • Waterproof and moisture-proof: FRP does not absorb water or seep water. When transporting food, food, textiles and other goods that are afraid of moisture, it can effectively isolate rainwater and ground moisture and protect the quality of the goods. 4. Strengthen structural strength and ensure transportation safety The fiberglass flat plate has high impact resistance and load-bearing capacity through the composite of glass fiber and resin, and can withstand heavy pressure of goods and bumpy vibrations during driving. Especially in heavy-duty freight (such as transporting steel and mechanical parts), the risk of deformation and fracture of the car can be reduced and the structural safety of the transportation process can be ensured. 5. Simplify maintenance and reduce operating costs The surface of fiberglass is smooth and not easy to get stained. It only requires simple rinsing when cleaning; it is free of rust and mold, and there is no need to remove rust and spray paint regularly like metal sheets, and there is no need to worry about the rot and insect-damaging of wooden sheets, which is lower in maintenance costs for long-term use. 6. Adapt to special vehicles to meet customization needs In special vehicles such as engineering vehicles, RVs, emergency rescue vehicles, fiberglass flat plates can be cut and spliced into special-shaped structures according to needs, and the color and surface texture can be customized (such as adding anti-slip textures, flame retardant coatings, etc.), which can not only meet functional requirements (such as wear-resistant protection of engineering vehicles, lightweight and aesthetics of RVs), but also improve the degree of professionalism of the vehicle. ▸ Seamlessly connect steel structures, standardize installation processes, and save 50% of construction cycle. ▸ The guide hole locking system is made in three steps and it will invade in 20 years without invading in wind and rain. Program Task Statement ●Inject natural light into the factory to reduce production line energy consumption. ●Let logistics and warehouses say goodbye to the cold and darkness and improve operational security. ● Shape the photosensitive aesthetics of commercial spaces and redefine the comfort experience. endnote: "Each carriage board is a poem of light written to the future" - Selected aerospace grade resin substrate, complete process quality control traceability, 15 years + extra long life commitment, and achieve eternal value with the final craftsmanship.

The core of cooling towers, the "calm responsibility" of industrial systems, lies in efficient heat dissipation. As its "core lung lobe", its performance is crucial! Are traditional materials prone to corrosion, bulky and short lifespan? It’s time to embrace the innovative power brought by fiberglass flat panels! Why do fiberglass flat plates become the "super muscles" of cooling towers? 1. As light as a feather, as stable as a rock! ●Light: More than 60% lighter than steel! It greatly reduces the burden on the tower body structure, reduces infrastructure costs, and makes installation and handling easier. ●Strength: The strength is comparable to steel! Resist pressure and impact, and remain unmoved in storms to ensure long-term and stable operation of the cooling tower. (Tension strength up to 500MPa!) 2. It is naturally resistant to corrosion and can be soaked in water vapor and "don't catch a cold"! ●Acid, alkali, salt, humid and heat environment? Don't be afraid of anything! A naturally resistant to corrosion, he completely bids farewell to the troubles of metal rust and wood rot. ●Chemical, electricity, metallurgy... No matter how severe the working conditions are, they can stay at their posts for 20 years without deteriorating performance. (Secret: Vinyl ester resin formula, specializing in strong corrosion!) 3. Extra long standby, saving worry and money! ●Resistant to ultraviolet rays and aging resistance, and does not fade, crack or powder when exposed to wind and sun. ●Life life span is up to 20-30 years! The number of shutdowns and replacements has been greatly reduced, the maintenance cost has plummeted, and the overall benefits can be seen. 4. Free design and double efficiency! ●Design whatever you want! Easy to customize large sizes and complex shapes, perfectly fit various cooling tower structures. ●The surface is smooth or customized texture, the water flow is more uniform, and the heat dissipation efficiency is higher, which helps the cooling tower to perform optimal performance. ●It is convenient to clean, not easy to accumulate dirt, and maintain efficient heat exchange for a long time. FRP flat plates are not only materials, but also the "lasting competitiveness" of cooling towers! ●More reliable: no fear of corrosion, stable operation, and reduce the risk of unplanned downtime. ●More economical: ultra-long life + extremely low maintenance, significantly optimized throughout the life cycle cost. ●More efficient: Optimized design brings better heat dissipation effect, saving energy and reducing consumption. ●More environmentally friendly: lightweight reduces carbon emissions, durability reduces waste, and some are recyclable. Choose fiberglass flat plates to inject long-lasting vitality like "reinforced steel and iron bones" into your cooling tower! Make cooling more efficient, make operation more worry-free, and make investment more worthwhile! Guangdong Guangming Composite Materials Co., Ltd. - Provide high-performance fiberglass flat panel solutions to help the cooling tower industry reach a new height! Why do fiberglass flat plates become the "super muscles" of cooling towers? 1. As light as a feather, as stable as a rock! ●Light: More than 60% lighter than steel! It greatly reduces the burden on the tower body structure, reduces infrastructure costs, and makes installation and handling easier. ●Strength: The strength is comparable to steel! Resist pressure and impact, and remain unmoved in storms to ensure long-term and stable operation of the cooling tower. (Tension strength up to 500MPa!) 2. It is naturally resistant to corrosion and can be soaked in water vapor and "don't catch a cold"! ●Acid, alkali, salt, humid and heat environment? Don't be afraid of anything! A naturally resistant to corrosion, he completely bids farewell to the troubles of metal rust and wood rot. ●Chemical, electricity, metallurgy... No matter how severe the working conditions are, they can stay at their posts for 20 years without deteriorating performance. (Secret: Vinyl ester resin formula, specializing in strong corrosion!) 3. Extra long standby, saving worry and money! ●Resistant to ultraviolet rays and aging resistance, and does not fade, crack or powder when exposed to wind and sun. ●Life life span is up to 20-30 years! The number of shutdowns and replacements has been greatly reduced, the maintenance cost has plummeted, and the overall benefits can be seen. 4. Free design and double efficiency! ●Design whatever you want! Easy to customize large sizes and complex shapes, perfectly fit various cooling tower structures. ●The surface is smooth or customized texture, the water flow is more uniform, and the heat dissipation efficiency is higher, which helps the cooling tower to perform optimal performance. ●It is convenient to clean, not easy to accumulate dirt, and maintain efficient heat exchange for a long time. FRP flat plates are not only materials, but also the "lasting competitiveness" of cooling towers! ●More reliable: no fear of corrosion, stable operation, and reduce the risk of unplanned downtime. ●More economical: ultra-long life + extremely low maintenance, significantly optimized throughout the life cycle cost. ●More efficient: Optimized design brings better heat dissipation effect, saving energy and reducing consumption. ●More environmentally friendly: lightweight reduces carbon emissions, durability reduces waste, and some are recyclable. Choose fiberglass flat plates to inject long-lasting vitality like "reinforced steel and iron bones" into your cooling tower! Make cooling more efficient, make operation more worry-free, and make investment more worthwhile! Guangdong Guangming Composite Materials Co., Ltd. - Provide high-performance fiberglass flat panel solutions to help the cooling tower industry reach a new height!

FRP fiberglass lighting tiles - reshape the building light environment and intelligent manufacturing eternal quality Core Value Proposition In the name of technology, we create a perfect dialogue between light and space - as light as cloud wings, as solid as rock; light is transparent and unexposed, and it will be renewed for a long time. Provide high-performance lighting system solutions for modern industrial buildings, commercial spaces and green living. Five outstanding genes 1. Master of light and shadow art: 80%-85% high light transmittance | 99%+ ultraviolet isolation | ≤2% Twenty years of light transmittance attenuation. ▸ The light is scientifically scattered and diffused evenly into the room, eliminating direct glare and creating a soft and calm natural light environment. ▸ The ultimate anti-yellowing technology protects the space and transparent nature, time flows, and light is as bright as before. 2. Conqueror of the Force of Nature: the circumferential tensile strength 180-300MPa | impact resistance ≈ 300 times ordinary glass. ▸ Build a building safety barrier with a lightweight and high-strength body (only 1/4 of the density of steel), fearless hail hurricanes. ▸ -40℃ extremely cold to 120℃ high temperature test, consistent performance, interpreting true all-weather reliability. 3. Eternal anti-corrosion shield armor: A1-level chemical corrosion resistance | B1-level fire protection certification | Salt spray/acid rain "immune constitution". ▸ The ultimate protection solution for chemical parks, coastal buildings, and high-corrosion environments, and reject rust and brittleness. ▸ The fire is extinguished, and there is no melting drop of poisonous smoke, which will win golden escape time for the life channel. 4. Energy-saving ecological engine: thermal conductivity 0.14kcal/m•h•℃| RoHS environmental certification | recyclable regeneration. ▸ Efficiently block heat transfer, reduce air conditioning energy consumption by 30% and create a breathable low-carbon building. ▸ From raw materials to recycling, we will fulfill our green commitment throughout the process, helping LEED certification and sustainable development. 5. Smart installation philosophy: 750/840 multi-spec adaptation | fastener modular system | seal anti-seepage process ▸ Seamlessly connect with the steel structure, standardize the installation process, and save 50% of the construction cycle. ▸ The guide hole-lock-sealing system is made in three steps, and it will not be invaded for 20 years without any invasion in wind and rain. Scenario mission statement ●Inject natural light energy into industrial plants to reduce production line energy consumption. ●Let logistics and warehousing say goodbye to the cold and dark, and improve operational safety. ●Aid agricultural greenhouse balance spectrum and activate crop growth genes. ●Shape the light-sensitive aesthetics of commercial spaces and redefine the comfort experience. Endnote: "Every piece of lighting tile is a poem of light written to the future" - Selected aerospace-grade resin substrates, full-process quality control traceability, 15 years + ultra-long life commitment, and realize eternal value with ultimate craftsmanship.

Physical performance characteristics 1 Lightweight and high strength: The density of fiberglass flat plates is generally between 1.5-2.0g/cm³, which is about 1/4-1/5 of that of carbon steel. It is light in weight and is easy to transport and install. At the same time, its tensile strength is close to or even exceeds carbon steel, and its specific strength is high. While reducing the weight of the structure, it can ensure high load-bearing capacity. 2 Light transmittance and ultraviolet masking: The light transmittance of some fiberglass flat plates can reach more than 90%, and can effectively block ultraviolet light. While blocking ultraviolet light, it can soften the sunlight source entering the room and reduce damage to the human body. 3 Thermal insulation: The fiberglass flat plate has a low thermal conductivity and has good thermal insulation performance. It can effectively reduce heat transfer and energy consumption. It is suitable for places with requirements for heat insulation, such as roofs and walls of buildings.   Chemical properties 1 Corrosion resistance: FRP flat plates have good resistance to atmospheric, water and general concentrations of acids, alkalis, salts, and various oils and solvents. In corrosive environments such as chemicals, oceans, and sewage treatment, they can maintain good performance and are not easily corroded and damaged, which can significantly reduce maintenance costs. 2 Aging resistance: A fiberglass flat plate that has been specially treated, such as resins and additives with good weather resistance, has good aging resistance. Under long-term exposure to natural environment conditions such as sunlight, wind and rain, it is not easy to experience aging such as fading, powdering, cracking, and long service life. Mechanical properties 1 Strong impact resistance: FRP flat plates have high toughness and impact resistance, and can withstand the damage of extreme environments such as strong winds, heavy rains, hailstones, etc. It is not easy to break or damage when impacted by external forces, and can maintain the integrity of the structure. 2 Good bending resistance: The reinforcement effect of glass fiber makes fiberglass flat plates have good bending resistance. They are not prone to deformation or breaking when subjected to a certain bending load. They can be used to make some structural parts that need to withstand bending forces, such as bridges, stair pedals, etc.   Electrical performance characteristics 1 Good insulation: FRP flat plate is an excellent insulating material that can still maintain good dielectric properties at high frequencies. Its dielectric strength is ≥20kV/mm, which can effectively prevent current from passing through and avoid electric shock accidents. It is suitable for electrical equipment, wire and cable protection and other fields.   Processing and appearance performance characteristics 1 Strong designability: By adjusting the proportion of glass fiber to resin, the arrangement of fibers, and choosing different molding processes, the performance of fibers can be customized, such as strength, stiffness, light transmittance, etc. At the same time, it can also be made through high-pressure molding of molds to produce various complex geometric shapes, surface textures and colors to meet the creative design needs of different fields. 2 Excellent surface quality: For example, molded fiberglass flat plates, the polished surface of the mold can be directly transferred to the product surface to achieve high finish and beautiful appearance. It can be used directly as a decorative surface, eliminating processing processes such as secondary spraying, which not only improves production efficiency, but also reduces costs. 3 Convenient installation: FRP flat plates can be processed such as cutting, drilling, bonding, etc., which is convenient for size adjustment and installation on site according to actual needs. It is convenient to construct, which can shorten the construction cycle and improve work efficiency. GM is a manufacturer specializing in the production of fiberglass materials. It produces at the source, has strict control over quality, and has high-quality after-sales service. It can customize products that exceed the market standard scale to provide precise services for the purposes you need, saving worry and effort!

The core value of FRP panels lies in their unique material properties. They combine the lightweight and corrosion-resistant characteristics of plastic with the high strength and durability of fiberglass. Therefore, their market is primarily focused on segments with a rigid need for lightweight strength, corrosion resistance, easy maintenance, and insulation. Key Target Market Segments 1. Construction and Infrastructure Sub-markets: Industrial factories, warehouses, greenhouses, sports stadiums, chemical plants, wastewater treatment facilities, etc. Needs: Factories and warehouses: Require roofing and wall materials that can withstand harsh weather, are easy to install, and allow for natural light. Greenhouses: Need materials with high light transmission, good thermal insulation, and durability against agricultural chemicals. Chemical plants: Must use structural materials that can resist corrosion from strong acids and bases. FRP Advantages: Lightweight, quick to install, high weather resistance, chemical corrosion resistance, good light transmission. 2. Transportation Sub-markets: Trucks, refrigerated trucks, RVs, cargo vans, ships, yachts, etc. Needs: Vehicle manufacturing: Seeks lightweight materials to improve fuel efficiency and payload capacity. Refrigerated trucks: Require excellent insulation and easy-to-clean interior walls. Marine vessels: Need water-resistant, corrosion-resistant, and high-strength materials. FRP Advantages: High strength, lightweight (reduces vehicle weight), corrosion resistance (no rust), excellent insulation, and a smooth surface that is easy to clean. 3. Agriculture and Animal Husbandry Sub-markets: Livestock farms, farms, feed sheds, agricultural equipment, etc. Needs: Livestock farms: Need building materials that resist corrosive gases like ammonia and are easy to clean and sanitize for hygiene. Agricultural equipment: Requires durable, impact-resistant materials that can withstand humid environments. FRP Advantages: Corrosion resistance, easy to clean, high strength, and good durability. 4. Industrial and Manufacturing Sub-markets: Food processing plants, electronics factories, pharmaceutical plants, equipment manufacturing, etc. Needs: Clean rooms: Require wall and ceiling materials with smooth surfaces that do not easily accumulate dust and are easy to clean. Equipment casings: Need lightweight, insulating, and durable materials. FRP Advantages: Smooth surface, easy to clean, and good insulation properties. Market Trends and Opportunities Green Building and Sustainability: As environmental awareness grows, FRP panels, as a durable and long-lasting material, can reduce the resource consumption associated with frequent replacements. Lightweighting Demand: The transportation industry's drive for energy efficiency and emission reduction will continue to fuel the demand for lightweight materials, offering a significant market opportunity for FRP panels. Technological Innovation: There is a market demand for higher-performance FRP panels (e.g., enhanced strength, better fire resistance). Innovation will be key to winning the competitive market. Conclusion The market for FRP panels is not monolithic; it is segmented across multiple vertical industries, each with unique application needs. A successful market strategy must involve providing customized products and solutions for the specific needs of each segment, such as offering food-safe interior panels for refrigerated trucks or a special corrosion-resistant formula for chemical plants.

Transportation   This user group primarily consists of vehicle manufacturing and repair companies, such as: Truck and refrigerated truck manufacturers: FRP panels are commonly used for truck bodies and liners. Their lightweight nature helps reduce the vehicle's overall weight, and they are easy to clean. RV and specialty vehicle manufacturers: FRP panels are a popular material for manufacturing the exterior shells and interiors of RVs due to their high strength and moldability. Ship and yacht builders: The water and corrosion resistance of FRP panels makes them widely used in hull structures and interior decorations. Key Advantages Lightweight: FRP has a much lower density than steel. Using FRP panels can significantly reduce a vehicle's weight. This brings two major benefits: first, it improves fuel efficiency, lowering operating costs; and second, it increases the payload capacity, allowing the vehicle to carry more cargo. High Strength and Durability: Despite being lightweight, FRP is very strong and can withstand impacts and pressure without deforming easily. It has excellent weather resistance, holding up against UV rays, rain, and extreme temperatures, which ensures a long service life. Corrosion Resistance: This is a core advantage of FRP. It does not rust and can resist corrosion from various chemicals, salt spray, and humid environments, making it especially suitable for refrigerated trucks or vehicles that transport chemicals. Easy to Clean and Maintain: The smooth surface of FRP is not prone to collecting dirt. It can be easily cleaned with water and standard cleaning agents, which helps maintain hygiene inside the vehicle—a crucial feature for food transport and medical vehicles. Insulation Properties: FRP has good thermal insulation properties, which is vital for refrigerated and insulated trucks that need to maintain a constant temperature. High Malleability: FRP can be easily molded into complex shapes using molds. This provides great flexibility in vehicle design, allowing for seamless, streamlined exteriors and reducing the number of joints, which enhances overall aesthetics.